MOTT - Multi Orbit Tactical Terminal Ku Band | Get SAT
Menu Icon Close Menu Icon
Contact Us

MOTT

Multi Orbit Tactical Terminal

The MOTT (Multi-Orbit Tactical Terminal) is a low profile, fully electronically steerable antenna (ESA) with no moving parts. It provides a low signature in a compact form and is designed for extreme environments with the most demanding requirements. The MOTT is optimized for mobile connectivity, with short acquisition time, allowing high dynamic tracking. The MOTT Supports transmit & receive with the Intelsat FlexMove GEO network in addition to LEO network, enabling switch from GEO to LEO networks.

 

Key Features

Multi-orbit-constellations

Multi orbit constellations

Blend and transfer network traffic in near real-time between GEO and LEO satellite constellations.

All-in-one-solution

All In One Solution

Integrated terminals include everything needed
for operation: modem, Antenna Management Unit
(AMU), tracking sensors, downconverter, and a full
RF front end.

No-moving-parts

No moving parts

Since there are no moving parts, calibration
is not required therefore providing
long-term reliability and lower maintenance
costs.

Easy- set-up-and-operation

Easy set-up and operation

The easy installation and integration allows end users
to transition from platform to platform in minutes.

Tech Spec

RF Performance Ku Band
Tx Frequency 13.75-14.5 GHz
Rx Frequency 10.7-12.75 GHz
Polarization V/H Linear/Circular SW controlled
Max EIRP 46.5 dBW boresight
Max G/T 10.5 dB / K
Azimuth Electrical coverage over full 360°
Elevation Electronically beam steering from 10° to 90°
Control Technique Combined IMU / RSSI / GPS (Optional)
Velocity Azimuth Azimuth >200° / Sec, Elevation >200° / Sec
Initial Acquisition Time <30 sec
Re-Acquisition time <100ms
Management Ethernet
Power Input 24-50 v DC
Power Consumption 735 W - 770 W
Weight 48 Kg (105.8 lb.)
System Size (W/H/L) 66 x 9 x 90.9 cm (26 x 3.5 x 35.7”)

Download Data Sheet

Please enter a valid email address
As the data sheet will send to the email

This field is for validation purposes and should be left unchanged.