Nano SAT H is the smallest and lightest KA band SATCOM terminal in the market with an integrated BUC and modem. It is optimized for “on-the-move” and man-carried portability and mobility applications. It is designed for the KA band and supports O3B MEO constellation.
Optimized for on-the-move and man-carried portability and mobility applications, the Nano SAT H provides autonomous operation for the transmission and reception of high bandwidth data rates at more than 4 Mbps.
Enabling low size, weight and power (SWaP) and high performance for on-the-move maritime and aviation platforms with cost-effective adoption.
Integrated terminals include everything needed for operation: modem, Antenna Control Unit (ACU), BUC (Block Up Converter), tracking sensors, LNB (Low Noise Block) downconverter and a full RF front end.
Designed for quick Roll On/Roll Off, the system allows easy installation and removal to enhance system mobility between different platforms and provides easy Roll On/Roll Off capabilities to create a competitive advantage.
Get SAT’s terminals are fully compliant and meet international IP66
ruggedized standards. The terminals have been proven to operate
in the world’s harshest environmental conditions.
|RF Performance||Ka Band|
|Tx Frequency||29-31 OR 27.5-30 GHz|
|Rx Frequency||19.2-21.2 OR 17.5-20 GHz|
|Max G/T||5.2 dB / K|
|Polarization||RHCP/LHCP (co-pol / cross-pol)|
|EIRP||37.7dBW (8w BUC) / 42.7dBW (25w BUC), with radome|
|Panel Size||13 x 13.5 cm (5 x 5.3")|
|Azimuth||Continues coverage over full 360°|
|Elevation||-6° to 90°|
|Control Technique||Combined IMU / RSSI / GPS (Optional)|
|Velocity||Azimuth >200° / Sec, Elevation > 200° / Sec|
|Initial Acquisition Time||<30 sec|
|Management||Web Interface/ Open AMIP 1.16/ SW ICD|
|Power Input||24-36v DC|
|Power Consumption||20W (Rx), 70W (TX/RX, with 8W BUC)|
|Interfaces||RS-232, Ethernet, TX / RX|
|Weight||4.17 Kg (9.19 lb.) with modem and BUC|
|System Size||21 x 23 cm (8.2 x 9")|