Nano SAT is an ultra-portable, lightweight, low-profile SATCOM terminal. Coming in at 2.3 kilos, it is optimized for “on-the-move” communication where there is no real estate available and man-carried portability and mobility applications. It is designed for the KA band and supports O3b MEO constellation, providing autonomous operation for the transmission and reception of high bandwidth data rates at more than 2 Mbps.
Enabling low size, weight and power (SWaP) and high performance for on-the-move maritime and aviation platforms with cost-effective adoption.
Integrated terminals include everything needed for operation: modem, Antenna Control Unit (ACU), BUC (Block Up Converter), tracking sensors, LNB (Low Noise Block) downconverter and a full RF front end.
Designed for quick Roll On/Roll Off, the system allows easy installation and removal to enhance system mobility between different platforms and provides easy Roll On/Roll Off capabilities to create a competitive advantage.
Get SAT’s terminals are fully compliant and meet international IP66
ruggedized standards. The terminals have been proven to operate
in the world’s harshest environmental conditions.
| RF Performance | Ka Band |
|---|---|
| Tx Frequency | 29-31 OR 27.5-30 GHz |
| Rx Frequency | 19.2-21.2 OR 17.5-20 GHz |
| Max G/T | 2.2 dB / K |
| Polarization | RHCP/LHCP (co-pol / cross-pol) |
| EIRP | 34.7dBW (8w BUC ) / 36.4dBW (12w BUC) / 39.7dBW (25w BUC) |
| Panel Size | 12.5 x 7 cm (5 x 2.7") |
| Azimuth | Continues coverage over full 360° |
| Elevation | 0° to 90° |
| Control Technique | Combined IMU / RSSI / GPS (Optional) |
| Velocity | Azimuth >200° / Sec, Elevation > 200° / Sec |
| Initial Acquisition Time | <30 sec |
| Re-Acquisition time | <100ms |
| Management | Web Interface/ Open AMIP 1.16/ SW ICD |
| Power Input | 12-36v DC |
| Power Consumption | 20W (RX), 70W (TX/RX, 8W BUC) |
| Interfaces | RS-232, Ethernet, TX / RX |
| Weight | 2.3 Kg (5.07 lb.) |
| System Size | 19.5 x 16 cm (7.6 x 6.3") |
